Mazak

For machines with control:

640 (NEXUS, M, T, PRO), MATRIX, MATRIX2, SMART, Smooth

Scout uses the MTConnect option, which must be enabled on the machine.

To enable the MTConnect option, please contact Mazak directly.

After enabling the MTConnect option and after connecting the machine to the LAN, the machine will start to support MTConnect standard, which is used by Scout to download data from it.

This can be tested by entering the machine’s IP address and (usually) port 5000 into a web browser:

http://[machine IP address]:5000/current

If the browser displays an XML document with data from the machine, it means that MTConnect is enabled and available.

Then contact us to setup SCT with MTConnect.